Loading Events

Basic Machining two-day course (Sept. 8 & 15)

September 8, 2019 @ 9:00 am - 5:00 pm

 

This is a two-day course taking place September 8 and September 15, 2019 from 9 a.m. (don’t be late!) to 5 p.m in Room 106, Building D, George Brown College.

The machine shops at George Brown are located in Building D at the corner of Dartnell Avenue and Bridgman Avenue. Parking is available on Bridgman Avenue, MacPherson Avenue and at the corner of Spadina and MacPherson.

The course costs $160 (please pay below). Registration is only complete once payment has been received. No refunds or exchanges. Do not register unless you are sure you can attend.

Recommended attire:

short sleeved t-shirt
long pants
sturdy shoes (CSA-approved workshoes/boots if you have them)
No open shoes, sandals or loose clothing of any kind.
No jewelry/watches.
Long hair must be tied back securely.
Bring safety glasses if you have them (particularly if you wear prescription glasses). Non-prescription safety glasses will be provided if needed.

 

 

It is beneficial for engineers to have a firm understanding of machining principals and limitations. Students interested in getting involved with campus groups such as Blue Sky Solar Racing or U of T’s Formula Racing Team would greatly benefit from building their machining skills.

U of T Engineering students (including those on PEY), researchers and faculty have access to MIE’s Machine Shop for professional services as well as use of the shop’s equipment and facilities. Courses are offered by the Faculty to provide machining and welding training:

Basic Machining: machine shop safety, lathe, mill, drill press.
Completion of this course required to gain access to the MIE’s Machine Shop facilities in MC78
Introduction to Welding: oxy-acetylene, manual arc & gas metal arc welding
Advanced Machining: Builds on the concepts introduced in the Basic Machining course. Pre-requisite: Basic Machining
Machining III: Builds on the concepts introduced in the Basic Machining course. Pre-requisite: Basic Machining

View all upcoming machining courses on the Event Calendar.

 

 

Questions?

Contact Professor Tony Sinclair at sinclair@mie.utoronto.ca

 

Event Details

Venue:

Venue

D106, George Brown College, 160 Kendal Street, Toronto, Canada

Details

Date:
September 8, 2019
Time:
9:00 am - 5:00 pm
Website:
https://www.mie.utoronto.ca/events/basic-machining-two-day-course-sept-8-15/

Share Event

Upcoming Events

All
  • All
  • Alumni events
  • Anti-Racism and Cultural Diversity Office events
  • Convocation events
  • Faculty & staff events
  • Info sessions
  • Lectures, seminars and workshops
  • Socials
  • U of T holidays & closures

Ph.D Candidate Seminar: An Investigation of SC05: a Chloroform and Dichloromethane Degrading Microbial Community for Bioremediation (Olivia Bulka)

Fri July 5, 2024 @ 9:00 am - 10:00 am
Abstract Bioaugmentation has emerged as an effective way to remediate groundwater of anthropogenic contaminants, such as chloroform (CF) and dichloromethane (DCM). The Dehalobacter genus can anaerobically respire many of these chlorinated compounds...

Seminar: “Multiple Micronutrient Fortification of Foods – An Update” – Professor Marthi Venkatesh-Mannar

Tue July 9, 2024 @ 2:00 pm - 3:30 pm
Abstract Food fortification programs aim to provide meaningful amounts of micronutrients (e.g., 30%-50% of the daily adult requirements) at the average consumption level of one or more food vehicles. Foods...

2024 Toronto Robotics Conference

Tue July 23, 2024 - Wed July 24, 2024
55 St. George Street
Toronto, Ontario M5S0C9 Canada
Interested in learning more about cutting-edge AI-robotics research at U of T and beyond? Join the Robotics Institute at the 2024 Toronto Robotics Conference for two days of mobility and...

Civic Holiday

Mon August 5, 2024
The university will be closed.  Enjoy the holiday!